| Customization: | Available |
|---|---|
| Type: | Diffuse Reflection Type Photoelectric Sensor |
| Output Signal Type: | Switching Type |
|
Still deciding? Get samples of US$ 3/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Photocontrol is a lighting switch control device that adheres to the UL773 and ANSIC136.41 standards. It is installed in street lamps, courtyard lamps, and other lighting fixtures as an automatic switch control mechanism. The device is designed to detect the ambient brightness and regulate the switch function of the lamps accordingly.
One of the key features of photocontrol is its wide voltage input, which makes it compatible with power grid standards around the world. This ensures that the device can be used in various locations without requiring any modifications or adjustments.
In addition to its voltage compatibility, photocontrol also offers different switching brightness thresholds and delay characteristics. These features help to prevent the device from being affected by lightning strikes or other electrical disturbances. By adjusting the brightness threshold and delay time, users can customize the device to suit their specific lighting needs and ensure optimal performance even in challenging conditions.
Overall, photocontrol is a versatile and reliable lighting switch control device that offers a range of benefits for both residential and commercial applications. Its ability to automatically regulate light output based on ambient brightness, combined with its wide voltage input and customizable switching characteristics, make it an ideal choice for anyone looking to improve the efficiency and reliability of their lighting system.
| Model | 3R-P02L |
|---|---|
| Rated Voltage | 100-277V,50/60Hz |
| Turn-On Light Levels | The minimum illuminance value to turn on the light is 10Lux; The maximum illuminance value to turn off the lights is 50Lux |
| Rated load | 1200W @ 277Vac |
| ON/OFF Ratio | 1:1.5~4 |
| Time Delay | 3-15 Seconds |
| Fail Mode | On or Off |
| Rated Current | 10A |
| Power Consumption | <1W |
| Electrical Life | >10000 ON/OFF Operations at Rated Load |
| Housing Material | UC/PV Resistant |
| Color | Blue |
| Dimension | Φ79mm*55mm |
| Operating Temperature | -20ºC~60ºC |
| Relative Humidity | 5%~95% |
Photocontrol is a device that has been designed with anti-jamming features to ensure smooth and efficient operation. One of the key design elements is the larger pin for the zero line compared to the input and output pins for the phase line. This helps to prevent any interference or jamming that may occur during operation.
When installing the Photocontrol, it is important to follow the correct procedure to ensure proper alignment and secure locking in place. Firstly, align the power pin with the socket hole and push it down until the bottom of the Photocontrol sits flush against the surface of the socket. It is recommended to apply slight pressure on the gasket at this stage to ensure a good seal.
Next, turn the Photocontrol clockwise to lock it in place. This will ensure that it remains securely connected and does not come loose during operation. It is important to note that when disassembling the Photocontrol, the process should be reversed to avoid any damage or misalignment.
By following these steps, users can ensure that their Photocontrol is installed correctly and operates smoothly without any issues related to jamming or interference.
){kind=link}